Skip to main content
Legia

IT Infrastructure & Cloud

How Many Access Points Does an Office Need?

The number of access points is calculated from devices connected at the same time, not just floor area. A short explanation with a worked example for an office of 60 employees.

SEO and Content Specialist

2 min read

A patch panel with blue and gray network cables

Short answer: count the number of devices connected at the same time, then check the coverage needed per room, and take whichever result is larger. One vendor reference, the Cisco Meraki high density guide, uses about 25 devices per radio as the basis for capacity. As an illustration, an office of 60 employees who each bring a laptop and a phone needs about 4 to 5 access points for capacity alone, before adding more for rooms behind concrete walls.

Step 1: count devices, not people

One employee usually brings more than one device that connects to Wi-Fi. Count the devices that are active at the same time during the busiest hour:

  • Employee laptops and phones.
  • Guest devices in meeting rooms or the lobby.
  • Operational devices that use Wi-Fi, such as printers, presentation screens, or attendance machines.
Illustration: office network

Step 2: divide by the capacity per access point

The Cisco Meraki guide calculates the number of access points from the 5 GHz devices connected at the same time, divided by about 25 per radio. An example for an office of 60 employees:

ComponentCount
Employee laptops60
Employee phones60
Guest devices at peak hours10
Operational devices on Wi-Fi5
Total simultaneous devices135

If about 70 percent of the devices use 5 GHz, there are about 95 devices on that band. Divided by 25, the result is about 4 access points. Add one as spare capacity in the busiest area, for a total of 4 to 5. This number is a starting point, not the final answer.

Step 3: check coverage room by room

Enough capacity does not mean the signal reaches every room. Concrete walls, laminated glass, elevators, and metal shelving weaken the signal far more than gypsum partitions do. An office with many closed rooms or several floors often needs extra access points even when the capacity calculation is already met.

Calculate large meeting rooms and training areas separately. A room with 40 people who all open a laptop and a phone may need an access point of its own.

Step 4: confirm with a survey

A calculation on paper has to be proven on site. A survey measures the signal in every room, looks for interference from neighboring networks, and confirms that the access point positions match the floor plan. After installation, test again at peak hours. The full design principles, including channel selection and guest network separation, are in the article Designing an Office Wi-Fi Network.

Common mistakes

  • One large access point in the middle of the office for every employee.
  • Adding repeaters instead of access points connected by cable.
  • Counting only the number of employees, forgetting second devices and guest devices.

In the Office Network Installation service, Legia determines the number and position of wireless access points during the site survey, based on the building floor plan and the number of users per room, then tests each point before handover.

Sources

Category IT Infrastructure & Cloud

Keep reading

Related articles

All Articles