Skip to main content
Legia

IT Support & Consulting

Dedicated Team, Project Outsourcing, or In-House Hiring?

A dedicated team, project outsourcing, and in-house hiring all add capacity to a technology team. The differences are who sets priorities, how certain the need is, and who carries the risk if a person leaves.

SEO and Content Specialist

5 min read

Two engineers working side by side in an office

Short answer: choose a dedicated team when the need is ongoing and priorities change often, so your own team has to set the order of work. Choose project outsourcing when the need is certain and the result can be defined up front. Choose in-house hiring for long-term core roles you want to own completely. Many companies use more than one at the same time.

When a technology team’s backlog is longer than its capacity, the first option that comes to mind is usually hiring. But hiring takes time, and not every need is permanent. Two other options often fit better: handing the work over as a project, or adding outside members who work inside your team (a dedicated team, or team augmentation). This article compares the three on the points that matter most.

Comparing a dedicated team, a project, and in-house hiring

AspectDedicated teamProject outsourcingIn-house hiring
Who sets prioritiesYour teamThe vendor, within the agreed scopeYour team
ScopeOpen, follows monthly needsFixed up front, along with the deliverablesOpen, follows the company’s needs
Time until startA few weeks from agreementAfter scope and contract are agreedDepends on the length of the hiring process
If the person leavesThe vendor replaces them, with a handover periodThe vendor’s responsibility, deliverables remain bound by the contractHiring starts over from the beginning
Cost patternPer team member per monthPer project, based on scopeSalary, benefits, and recruitment costs
Illustration: dedicated team

When is project outsourcing the right fit?

A project fits when you can clearly answer “what must be built, and by when”. Examples are building a new application with a scope that has already been mapped, or moving a system to another server. The vendor takes responsibility for the order of work and the deliverables, while you review the results at each stage.

The weakness shows up when requirements change often. Every scope change has to be reassessed for its effect on time and cost, and if changes keep coming, the project model feels rigid. The key to a successful project is requirements written clearly up front; how to prepare them is covered in How to Write a Requirements Document Before Building an Application.

When is a dedicated team the right fit?

A dedicated team fits when the work is never truly “done”: a digital product that keeps evolving, an internal system that receives feature requests every month, or a team that is missing one or two specific roles. Vendor team members work with a fixed time allocation, joining the daily meetings, work board, and release cycle of your team. Priorities stay in your hands.

What you need to prepare on your side: someone who sets priorities, documentation and system access, and time to review the work. Without those, the added team members will wait for direction, and their capacity is wasted.

When is in-house hiring the right fit?

Hiring is still the right choice for core roles that hold the most important knowledge about your systems and business, such as a technical lead or a systems architect. A role like this should belong to the company, because the knowledge it accumulates is a long-term asset.

The consequences are time and risk: the hiring process can take months, and if the person leaves, the process starts over from the beginning.

Costs to compare fairly

Comparing a dedicated team’s monthly rate with an employee’s salary is often misleading, because the two do not cover the same things. For a fair comparison, also count:

  • Recruitment costs: job ads, team interview time, and the months the position stays empty.
  • Benefits and employment obligations on top of base salary.
  • Time to productivity: a new employee and an outside team member both need a ramp-up period.
  • Vacancy risk: if the person leaves, how long the work stops until a replacement is ready.
  • Flexibility: whether capacity can be reduced when the need drops, without a lengthy process.

For a project, compare the total project cost with the cost of building the same thing with an internal team, including the management time it takes up.

Combinations that are often used

In practice, the three rarely exclude each other. A common pattern:

  1. Core roles are hired in-house, for example one technical lead who owns the direction of the system.
  2. Extra capacity comes from a dedicated team, for roles whose demand rises and falls, such as engineers or QA.
  3. Clearly defined work is handed over as a project, for example a server migration or a new application separate from the main product.

Questions to decide with

  1. How certain is the need for the next three to six months?
  2. Who on your team will set priorities and review the work?
  3. Does this role hold core knowledge that must stay in the company?
  4. How quickly is the extra capacity needed?
  5. What happens if the person in this role leaves suddenly?

How Legia handles it

In the Dedicated Team service, Legia provides backend and frontend engineers, DevOps engineers, UI/UX designers, and QA who work inside your team, using the tools and workflow you already have. The estimated time from agreement until team members start working is 2 to 3 weeks, followed by a ramp-up period. Code and documentation are stored in your repository from day one, and if a team member leaves, Legia replaces them with a handover period. The contract is monthly and the scale can be adjusted.

Frequently asked questions

What is the difference between a dedicated team and outsourcing?

In project outsourcing, the vendor takes responsibility for scope and the order of work. In a dedicated team, the vendor provides capacity and your team decides the priorities.

Who manages the daily work of dedicated team members?

Your team. The vendor usually provides a technical lead for quality and personnel matters, but decisions on product direction stay in your hands.

Does the code that is produced belong to the company?

It should, and that needs to be written in the contract. Make sure the code is stored in a repository under your company’s name, not the vendor’s.

Other services in the same area, including IT Support and IT Consulting, are on the IT Support & Consulting page.

Need a team that looks after devices, accounts, and the office network without hiring your own IT staff? See Legia IT support and consulting services, or schedule a consultation through the contact page.

Category IT Support & Consulting

Keep reading

Related articles

All Articles