Skip to main content
Legia

IT Infrastructure & Cloud

What is RAID?

Also called redundant array of independent disks, RAID 1, RAID 5, RAID 10.

Short definition

RAID (redundant array of independent disks) is a way to combine several disks into one storage unit so data stays accessible if one disk fails, or so reads and writes are faster. RAID is not a substitute for backups.

Common levels

RAID 1 copies the same data to two disks, so one disk can fail. RAID 5 spreads data and parity information across at least three disks and can survive one disk failure. RAID 6 is similar but survives two disk failures at once. RAID 10 combines mirroring and striping, offering both speed and fault tolerance. RAID 0 only splits data for speed and offers no protection at all.

RAID is not a backup

RAID protects against just one type of problem: a physically failed disk. Files that are deleted, overwritten with the wrong version, or locked by ransomware are deleted or locked on every RAID disk in the same second. Fire and theft also hit the whole device at once. That is why servers and NAS devices with RAID still need separate backups, ideally following the 3-2-1 rule.

Things to keep in mind

Set up monitoring so a failed disk is noticed right away. A RAID array that has lost one disk still runs normally from the user's point of view, and the problem is often only discovered when a second disk fails. Rebuilding after a disk is replaced can take a long time on high-capacity disks, and protection is reduced during that time.

Related Legia service Server Installation & Management Setup, hardening, monitoring, and migration for physical, virtual, and cloud servers.